logo
Send Message

Outdoor Luminaires: Testing and Certification Requirements (China Market)

Outdoor Luminaires: Testing and Certification Requirements (China Market)
Features Gallery Product Description Request A Quote
Features
Specifications
Basic Infomation
Place of Origin: China
Brand Name: Global United Technology Services Co.,LTD
Certification: CCC
Payment & Shipping Terms
Product Description

I. China Market Access: First Determine Whether the Product Falls Within the CCC Catalogue

For outdoor luminaires, the first step is not selecting test items — it is determining whether the product falls within the scope of the mandatory CCC (China Compulsory Certification) Catalogue. Within the lighting equipment category, compulsory certification mainly covers fixed general-purpose luminaires, portable general-purpose luminaires, recessed luminaires, ground-recessed luminaires, aquarium luminaires, socket-mounted nightlights and portable luminaires for children, where the supply voltage is above 36 V but not exceeding 1,000 V (AC or DC, r.m.s.). Controlgear such as LED drivers requires separate certification.
 

The most commonly overlooked point:​ the Catalogue's scope-definition table explicitly excludes tunnel luminaires, road and street lighting luminaires, floodlights, column-type composite luminaires with an overall height of 2.5 m or more, and luminaires for lighting public outdoor areas. In other words, the most typical outdoor products — streetlights, floodlights and high-mast garden luminaires — mostly fall outside​ the mandatory CCC scope. The simplistic rule of thumb that "anything above 36 V requires CCC" does not hold here. The definitive references are the CCC Catalogue Description and Scope Definition Table issued by the State Administration for Market Regulation (SAMR) and the CNCA-C10-01 implementation rules.

1. Mandatory CCC Certification (Products Within the Catalogue)

  • Applicable standards:​ Safety — GB 7000.1 (general requirements) plus the applicable GB 7000.2xx particular requirements; EMC — GB/T 17743 (radio disturbance characteristics) and GB 17625.1 (harmonic current emission limits). Current valid editions apply in all cases.
     
  • Test scope:​ Insulation resistance, earthing continuity, electric strength (dielectric withstand), protection against electric shock, temperature rise, heat and fire resistance, plus disturbance voltage, radiated disturbance and harmonic current emissions.
     
  • Process:​ Application submission with product documentation → type testing at a designated laboratory → initial factory inspection (factory quality assurance capability and product conformity, with particular attention to the critical component list) → certification decision and certificate issuance → post-certification surveillance (annual follow-up inspection).
     
  • Maintenance:​ Any change to critical parts — LED drivers, gaskets, cable entries, etc. — must be declared promptly; failure to do so may compromise certificate validity.

2. Type-Test Report / Voluntary Certification (Products Outside the CCC Catalogue)

For outdoor luminaires outside the Catalogue, the prevailing practice is to obtain a type-test (commissioned test) report from a CMA/CNAS-accredited laboratory covering electrical safety, photometric performance, environmental adaptability and ingress protection. Such reports are used for tendering, project acceptance, e-commerce onboarding and procurement vetting. Road and street lighting luminaires and floodlights may also opt for CQC voluntary product certification as third-party evidence of conformity.

II. General Test Items (Outdoor-Specific Priorities)

  • Electrical safety:​ Input voltage and current, active power and power factor, leakage current, insulation resistance, earthing resistance and dielectric withstand tests. Outdoor products should also address surge (lightning) immunity — particularly in lightning-prone regions.
     
  • Environmental adaptability:​ High- and low-temperature storage and operation, cyclic damp heat, temperature cycling, vibration and shock, neutral salt spray corrosion (GB/T 10125, GB/T 2423.17), and UV ageing. Coastal, rainy and high-diurnal-swing sites call for higher severity levels.
     
  • Photometric performance:​ Luminous flux, light distribution curve and luminous intensity distribution, correlated colour temperature, colour rendering index, glare rating, illuminance uniformity and lumen maintenance. Road and garden lighting is judged primarily on light distribution and glare control, not simply on maximising lumen output.
     
  • Physical protection:​ Enclosure material strength, impact and mechanical collision resistance, and ingress protection rating (IP65/IP67 are common outdoors). IP test methods follow GB/T 4208; sample condition, post-test damp conditioning and repeated dielectric withstand verification for luminaires follow the relevant clauses of GB 7000.1. Test samples must be fitted with gaskets, breather valves and cable glands, and tested in their actual mounting orientation.

III. Summary

China's market-access logic can be summed up as "scope first, test plan second": products within the Catalogue follow mandatory CCC certification (safety + EMC + factory inspection + annual surveillance), while those outside it rely on a CMA/CNAS type-test report or voluntary certification to demonstrate compliance. Neither substitutes for validation against real outdoor service conditions. For outdoor luminaires, the true failure risk rarely lies in whether a certificate exists — it lies in long-term reliability items such as IP sealing, salt spray corrosion, temperature cycling and surge withstand. Where products are also exported to the EU or North America, additional assessment under CE and UL/ETL schemes is required; those fall outside the scope of this note.


Global United Technology Services Co., Ltd. owns Internationally recognized CNAS (L5775) laboratory qualification, US FCC NVLAP qualification, domestic CMA qualification for inspection and testing in, capable of issuing internationally mutually recognized test reports, as well as authorized qualifications from major institutions such as UK's ITS, Germany's TUV, and Belgium's Eurof; focusing on the core testing fields of EMC, electrical safety, wireless RF, and chemical testing certification agency for export compliance, providing a one-stop service of "testing rectification technical training", making us your ideal partner!

Contacut Us
Email: +86 18025848511
Whatsapp: +86 18025848511
WeChat: 18025848511

Recommended Products
Get in touch with us
Contact Person : Venus Chen
Tel : 0086 137 9823 6128
Characters Remaining(20/3000)