logo
Send Message

What Certifications Are Required to Export Decorative Light Strings to the EU?

What Certifications Are Required to Export Decorative Light Strings to the EU?
Features Gallery Product Description Request A Quote
Features
Specifications
Basic Infomation
Place of Origin: China
Brand Name: Global United Technology Services Co.,LTD
Certification: CE
Payment & Shipping Terms
Product Description

EU Market: CE Conformity Assessment

Before placing decorative light strings on the EU market, the manufacturer must carry out the applicable conformity assessment, draw up an EU Declaration of Conformity (DoC) and affix the CE marking. CE is a manufacturer's declaration of conformity rather than a single "certificate". The following legislation and directives typically apply.

1. Low Voltage Directive (LVD, 2014/35/EU)

Applies to electrical equipment rated at 50–1000 V AC or 75–1500 V DC. Light strings must remain electrically safe under normal use and foreseeable single-fault conditions. Key checks include insulation, creepage distances and clearances, earth continuity, protection against electric shock, temperature rise, mechanical strength, conductor cross-section and strain relief, and the IP rating of outdoor versions; where relevant, human exposure to electromagnetic fields is assessed against EN 62493. The usual harmonised standards are EN IEC 60598-1 (general requirements for luminaires) together with EN 60598-2-20 (light chains), while rope lights fall under EN 60598-2-21.

For rechargeable models, the charging circuit must also be assessed under overcharge, short-circuit and reverse-polarity conditions to prevent overheating, fire or explosion, and the product must meet its obligations under the Batteries Regulation (EU) 2023/1542.

2. Electromagnetic Compatibility Directive (EMC, 2014/30/EU)

Unlike the LVD, the EMC Directive has no voltage threshold: virtually all electrically powered light strings fall within its scope. It limits the electromagnetic disturbance emitted by the product (EMI) so that televisions, radios and wireless communications are not affected, assessed primarily through conducted and radiated emission tests. It also requires adequate immunity (EMS) so that the product does not malfunction, lock up or suffer damage when exposed to electrostatic discharge, RF electromagnetic fields, electrical fast transients, surges or voltage dips.

Lighting equipment is normally tested against EN 55015 / EN IEC 55015 (emissions), EN 61547 (immunity), EN 61000-3-2 (harmonic currents) and EN 61000-3-3 (voltage fluctuations and flicker). Products incorporating controllers should be reviewed against the standards applicable to their actual circuitry.

3. A Note on Voltage Thresholds

Low-voltage light strings operating below 50 V AC or 75 V DC fall outside the scope of the LVD, so LVD testing is not required. EMC obligations still apply, however, and the product must also satisfy EU general product safety requirements. The common shorthand that "EMC + LVD testing is only required above 75 V DC / 50 V AC" is therefore inaccurate: the voltage threshold governs the LVD only, not EMC.

4. RoHS Directive (2011/65/EU, as amended by (EU) 2015/863)

Restricts ten substances and substance groups in electrical and electronic equipment: lead, mercury, cadmium, hexavalent chromium, PBBs, PBDEs and four phthalates. Housings, cable insulation, PCBs, solders and coatings must all comply — for example, solders with excessive lead content must not be used. The relevant technical documentation and Declaration of Conformity must be retained for at least ten years.

5. Ecodesign and Energy Labelling (ErP)

Under the framework Directive 2009/125/EC, light sources and products containing light sources are subject to Regulation (EU) 2019/2020 on ecodesign, while energy labelling is governed by Regulation (EU) 2019/2015. Registration in the EPREL database and an A–G energy label are required. The energy class directly affects both market access and competitiveness. Note that very low-output miniature decorative lamps, battery-only products and solar-powered products may qualify for exemptions; applicability should be determined case by case based on luminous flux, power supply and how the product is placed on the market.

6. REACH ((EC) No 1907/2006) and Related Chemical Requirements

Manufacturers must identify Substances of Very High Concern (SVHC) in the product and ensure that coatings, plastics, cables and flame-retardant components comply with the applicable restrictions. Where an SVHC exceeds 0.1% w/w, notification and supply-chain information duties apply. Light strings also warrant particular attention to the POPs Regulation (EU) 2019/1021 (e.g. SCCPs and HBCDD) and to take-back obligations under the WEEE Directive 2012/19/EU.

7. Requirements Triggered by Specific Product Configurations

Light strings with integrated Bluetooth, Wi-Fi or other radio control are assessed under the Radio Equipment Directive 2014/53/EU (RED) instead. Packaging requirements and country-specific labelling language should also be verified.

Global United Technology Services Co., Ltd. owns Internationally recognized CNAS (L5775) laboratory qualification, US FCC NVLAP qualification, domestic CMA qualification for inspection and testing in, capable of issuing internationally mutually recognized test reports, as well as authorized qualifications from major institutions such as UK's ITS, Germany's TUV, and Belgium's Eurof; focusing on the core testing fields of EMC, electrical safety, wireless RF, and chemical testing certification agency for export compliance, providing a one-stop service of "testing rectification technical training", making us your ideal partner!

Contact Us

Email:vicky.mo@gtstest.com
Whatsapp: +86 18025848511
WeChat:   18025848511

Recommended Products
Get in touch with us
Contact Person : Venus Chen
Tel : 0086 137 9823 6128
Characters Remaining(20/3000)